None of these items are exotic you should be able to get everything at your local hardware store and walk out with change from a $10 bill. You’ll also need a few other bits of hardware, which are given in the parts list above. I used a 2-inch-long, 10-32 brass screw for my mount, but a stainless-steel screw will work just as well. It needs to have 32 threads-per-inch, or the mount won’t track at the correct rate. The second important part is the drive screw. When you’re at the hardware store, try a few out and pick the one that feels best. This is why I like the Stanley model - the nylon bushings between hinge halves provides a smooth running, sturdy assembly. You’ll also want to choose a hinge that has minimal play. You can use any brand - the crucial parameter is the distance from the centre of the hinge pin to the centre of the hole at the far end of the hinge, which should be close to 7-3/16 inches (182mm). The heart of my tracker is a heavy duty, 8-inch strap hinge made by Stanley Hardware.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |